In a greenhouse, everything is interconnected.
An aluminium profile for a greenhouse cannot be designed in isolation
A few grams less aluminium per metre. An additional drainage channel. A critical tolerance that must be maintained over several metres. A connection that eliminates the need for two separate components. Or the choice of aluminium with a lower CO₂e footprint. On the drawing board, these may seem like individual decisions. In a greenhouse, they are all connected.
An aluminium profile is part of a much larger system within a greenhouse. It provides structural support, connects components, guides movement, drains water or forms the basis for moving parts. Sometimes, a single profile performs several of these functions at once.
A change in geometry, wall thickness, alloy or tolerance can therefore affect structural strength, manufacturing, assembly, automation, material consumption and ultimately the performance of the entire system.
That is precisely why much of the potential for optimising an aluminium profile lies in the decisions made before the extrusion die is manufactured.
Not as light as possible, but material where it matters
Reducing weight may seem an obvious way to cut material consumption and costs. But simply making a greenhouse profile thinner is rarely the answer. The real question is where the aluminium is needed from a technical perspective.
A profile used in a greenhouse roof, façade, roof vent or internal transport system must withstand specific loads and meet particular functional requirements. Its geometry, alloy, wall thicknesses and reinforcements all need to work together. In some areas, material can be removed, while elsewhere an additional rib, chamber or modified geometry may be necessary to maintain sufficient rigidity or functionality.
That distinction matters. Good design is not about achieving the lowest possible weight, but about using material as effectively as possible.
And while a few grams per metre may seem insignificant, the same design choice can
Even lightweight design requires careful technical consideration
In greenhouse construction, material use has another important dimension. Daylight plays a vital role in greenhouse performance, and the structure surrounding the crops influences how much natural light actually reaches them.
A slimmer aluminium profile can help reduce shading. At the same time, the profile must continue to meet the requirements of the overall greenhouse system, including wind and snow loads, installed equipment and local conditions. Once again, no single design factor can be considered in isolation.
Wall thickness, profile depth, geometry, alloy, strength, extrudability and material consumption are all interconnected. A modification that appears beneficial from one perspective must therefore always be assessed in the context of the profile's overall function.
Water follows the geometry we design
The same applies to water management. Rainwater and condensation need to be collected and drained away in a controlled manner. How this happens depends not only on the systems surrounding the profile. The geometry of roof gutters, condensation gutters, drainage channels, drip edges, joints and connections also determines where water collects and the path it follows. This makes water management an important consideration from the profile design stage onwards.
A well-designed cross-section can also combine several functions. Drainage, fastening or connection features do not always require separate components. Where functions can be technically integrated into a single extruded profile, this can reduce the number of parts and connections while simplifying assembly.
The opportunity, therefore, lies not just in the profile itself, but in understanding which functions it can fulfil within the overall system.
“The greatest gains don't always come from what you change in a design, but from what you still have the opportunity to change.”
Automation makes deviations more apparent
This systems-based approach becomes even more important when aluminium profiles are used in automated growing and transport systems.
A growing bench, shuttle or other moving component must not only reach the correct position once, but do so consistently, over longer distances and after repeated movements. Dimensional accuracy, straightness, tolerances, connections and repeatability then become essential to the reliability of the entire system.
A small deviation in a single profile may not seem significant on its own. However, when that same deviation occurs across multiple profiles or extends along a lengthy installation, its impact can become much greater. That is why repeatability goes beyond meeting dimensional specifications for an individual product. It also requires careful consideration of the alloy, heat treatment, extrusion process, cut lengths and any subsequent machining operations.
In an automated application, 'roughly the right fit' is simply not good enough.
Sustainability does not begin with a single material choice
When it comes to sustainability, it is tempting to focus on just one characteristic: recycled aluminium or low-carbon aluminium. But the overall environmental impact of a profile depends on much more.
The amount of aluminium required by the design matters, as do the origin of the material, its recycled content, the energy used in primary aluminium production, transport, secondary processing, service life and recycling potential at the end of its life. Material traceability and CO₂e data are also becoming increasingly important from a business perspective. Regulations such as CBAM, alongside growing demands for information from customers and supply chain partners, make it increasingly important not only to make informed material choices, but also to be able to substantiate them when required.
With BLUE by BOAL, we can offer aluminium containing at least 65% recycled content, as well as a low-carbon option with a footprint of no more than 4 kg CO₂e per kilogram of aluminium. But the same principle applies here: material selection and profile design must be considered together. Choosing low-carbon aluminium makes sense. So does avoiding aluminium in a profile where it serves no technical purpose.
The extrusion die marks a critical turning point
Many of these considerations ultimately come together at the same stage: before the design is finalised and the extrusion die is manufactured.
When a fully developed profile design only reaches the extrusion partner at this point, it may prove perfectly feasible to produce. However, it may also mean that opportunities for optimisation have already been missed because other parts of the system have been designed around that particular geometry.
Early technical collaboration does not necessarily mean redesigning a profile from scratch. Sometimes, the assessment simply confirms that the chosen solution is the right one. In other cases, it may reveal opportunities to reduce wall thickness in specific areas, reconsider a critical tolerance, integrate functions or adjust the geometry to make the profile easier to extrude consistently and reliably.
That is the value of co-engineering: not designing on behalf of the customer, but bringing together expertise in the application and knowledge of aluminium extrusion early enough in the process to keep design options open.
From aluminium profile to system-level thinking
Perhaps that is the most important conclusion. The question is not simply: can we extrude this aluminium profile?
The more interesting questions come before that. What function must the profile fulfil within the system? What loads must it withstand? Where is material really needed? Which tolerances are critical to its function? Can functions be integrated? How is water managed? What requirements does automation impose? Which material choice supports the sustainability objectives? And can the final design be manufactured reliably and consistently?
Answering these questions sometimes means bringing engineers, procurement specialists, system developers and extrusion experts together earlier than usual.
So, is a new greenhouse profile on the drawing board, with the design not yet finalised? Good. There is still an opportunity to explore the possibilities together.
A new greenhouse profile on the drawing board? Design not finalised yet?
Great! There’s still time to explore the possibilities together.
Read more
A consistent approach to leadership
Good leadership starts with understanding what people need. Particularly in a manufacturing environment, where employees with different backgrounds, e...
Read more
Why aluminium matters in the next phase of European solar
The European solar industry is maturing. For years, the sector was assessed mainly on its contribution to clean energy. Today, however, there is also...
Read more
Progress requires measurable aluminium choices
Aluminium is a material of progress. It is lightweight, strong, formable, durable and fully recyclable. In sectors such as solar, transport, electrica...
Read more